Wind power and the rotor
Wind power grows with the cube of its speed, and a rotor takes only part of it.
Motion slowed down 25 times, equally for the wind and the rotor.
- Wind power
- 9.53 W
- Shaft power
- 1.43 W
- Rotor speed
- 382 rpm
- Shaft torque
- 35.7 mN·m
What you can see here
- Wind power grows with the cube of the speed, : a 0.24 × 0.30 m rotor sees 2.8 W at 4 m/s and 22.6 W, eight times more, at 8 m/s.
- Power grows in proportion to the area (height fixed at m): a rotor twice as wide gives twice the power, but at a fixed it turns half as fast, so the torque is four times larger.
- Only part of the power reaches the shaft, , at most 16/27 ≈ 0.59 (the Betz limit); a small Savonius drag rotor gets about 0.15, and here you set yourself.
Formulas
- : wind power (W); : air density, 1.225 kg/m³; : swept area (m²), where is the diameter and the height of the rotor, fixed at 0.30 m in the simulation; : wind speed (m/s)
- : shaft power (W); : power coefficient, at most (the Betz limit)
- : angular speed of the rotor (rad/s); : tip-speed ratio, 0.8 in the simulation; revolutions per minute are
- : shaft torque (N·m)