Hooke's law and Poisson's ratio

Elongation grows in proportion to the force, and the sample gets thinner as it stretches.

F = 80 NL0

The dashed outline is the unloaded sample; deformation shown 100 times larger.Past the elastic range: a real sample would already yield or break.

00.511.52010203040ε (%)σ (MPa)elastic limit
N
mm
mm
Stress
2 MPa
Strain
0.1%
Elongation
50 µm
Narrowing
−3.5 µm

What you can see here

  • Stress is force per cross-section, , and does not depend on the material: the same force on a sample half as wide gives twice the stress.
  • Young's modulus sets the strain, : a stiffer material stretches less. In the simulation MPa is fixed, so the working point moves along one straight line.
  • A stretched sample gets narrower in width and thickness by the fraction of the strain; here and the thickness is 4 mm. At (rubber) the volume would not change.
  • Hooke's law holds up to about 1% strain; beyond that the plastic yields or breaks, and the chart keeps drawing the line. A layered print is not uniform, so the numbers are for comparison.

Formulas

  • : stress (MPa); : force (N); : cross-section (mm²); a newton per square millimetre is exactly a megapascal
  • : strain; : Young's modulus (MPa)
  • : elongation (mm); : gauge length (mm); this gives the school form with stiffness
  • : Poisson's ratio; : transverse strain, negative when stretching