Cantilever beam
A cantilever bends more the farther out the force acts and the lower the beam is.
The dashed outline is the unloaded beam; deflection shown 5 times larger.Too much deflection for small-deflection theory: the numbers are only a rough guide now.
- Bending moment
- 600 N·mm
- Stress
- 3.75 MPa
- Second moment
- 640 mm⁴
- Deflection
- 750 µm
What you can see here
- The bending moment is largest at the wall, , and falls to zero under the force. The stress is largest there too (top stretched, bottom compressed), and that is where brackets break.
- Deflection grows with the cube of the force's distance: twice as far means 8 times the deflection. It falls the same way with height: a beam twice as tall bends 8 times less.
- For N, mm and mm you get MPa and mm. The assumed MPa and mm are values for a print, not solid plastic.
- The formulas describe small deflections of an elastic material, without the beam's own weight and shear, so the numbers are for comparison, not for design.
Formulas
- : bending moment at the wall (N·mm); : force (N); : distance of the force from the wall (mm)
- : second moment of area (mm⁴); : width (mm); : height in the direction of the force (mm)
- : largest stress, at the wall (MPa); : section modulus (mm³)
- : deflection under the load (mm); : Young's modulus (MPa)